Tuesday, February 14, 2012

Triple 'T' Tuesdays: The Slipstitch

Welcome Back to Triple "T" Tuesdays. Today I wanted to to talk about the slip stitch. I love this stitch because it's so versitile and hidden. Lately I've been using it a lot because I've been doing a lot of hand binding and garment construction. In fact, I jammed through a bunch of cowls the other day so I spent some time on my couch turning them right side out and finishing them off by closing the opening with the trusty slip stitch. So here's the simple technique I use for closing a seam.

IMG_8131

I find it easier to iron the seam I am closing first, so it creates a natural crease along the seam line. This fold will act as your guideline and ironing it down will help ensure that your seam will lie flat and naturally against the rest of the seam.

IMG_8132

Loop your thread through your needle so you create a double strand, matching the ends together. Create a double knot to secure the ends. A double knot will better help anchor your thread in the fabric, so it doesn't pass all the way though.

IMG_8138

Bring your needle up though the right side of the crease on one side of the seam, as close to the end of your machine stitching as possible.

IMG_8140

Pull your needle and thread though all the way until the knot meets the underside of the crease. Now your knot should be hidden in the fold on the wrong side of the fabric.

IMG_8142

Working on the right side of the fabric, and side A of the fold, place the tip of your needle through the crease on the opposite seam edge (Side B). The key is getting it directly across from where you came up so the stitch essentially disappears and lies flat.

IMG_8143

Work the tip of your needle into the fold on Side B (and on the wrong side of the fabric) but not through both layers - only the top layer. You want to nestle your needle so it's sandwiched along the crease and between the two layers of fabric that create the fold of that side of the seam. Bring your needle back through the right side of fabric at the crease on the same side (Side B) about 1/4" from where you inserted your needle. Think of it as hiding your thread / stitch directly in the crease.

IMG_8146.2

Pull your needle and thread all the way through on the right side of the fabric on Side B and pull tightly to create your stitch.

IMG_8149

Repeat this on the opposite side of the seam (Side A). You stitches will alternate from one side of the seam to the other until you reach the end of your opening and the beginning of your machine stitching.

IMG_8152

To finish your seam, once you reach the opposite side and the machine stitching, loop your needle under the first stitch of machine stitching.

IMG_8153

Bring your needle through the loop and create a single knot around the stitch.

IMG_8154

Insert your needle at the knot and pull it back though the seam as far as you can go with the needle, then come up again on the right side of your fabric.

IMG_8155

Clip the tail of the thread as close to the fabric as you can without cutting the fabric. Pull the fabric slightly to pull the tail back down into the seam and hide the loose ends.

IMG_8156

Walla! Now you've created an invisible seam. You can use the same basic technique when hand binding your quilts. You binding will already have the natural crease, but your quilt backing obviously won't. Apply the same theory, but one side of your seam will be flat so you will have to "imagine" a crease there, but it will work the same.

IMG_8157

Please let me know if you find any of this confusing so I can clarify my instructions. I hope this helps. Do you have a great Tip, Tool or Technique that you'd like to share? Email me and I'll set up a guest post for an upcoming edition of Triple "T" Tuesdays.

7 comments:

  1. Wow...awesome...Thanks for a great tutorial!

    ReplyDelete
    Replies
    1. You're so welcome! Hope it's helpful.

      Delete
  2. Is this also called the "ladder stitch"? I don't know whip stitch from slip stitch from ladder stitch...I just know I do what you're showing, but thought it was called a ladder stitch. Not that what it's called matters as long as it holds the binding in place.

    ReplyDelete
  3. Thanks for this! It inspired me to pick up a few pillows I needed to slip stitch close last night which I'd been avoiding since I didn't like how it turned out last time I tried it. Thanks to your tutorial they look much better now!

    ReplyDelete